All articles

Can I Reuse a Company NFC Business Card When an Employee Leaves?

Yes, you can reuse an NFC business card if nothing personal is printed on it and the chip isn't locked. Here's how to check and hand it over.

Cover card with the title 'Can I Reuse a Company NFC Business Card When an Employee Leaves?' on a dark background

Yes, you can usually reuse an NFC business card when an employee leaves, as long as their name isn’t printed on it and the chip isn’t locked. The chip only stores a link. Point that link at the new person’s profile, or change the page it already opens, and the same card works for someone else.

Which of those two jobs you’re doing depends on what the chip stores, and a phone can tell you in under a minute.

What an NFC business card actually stores

An NFC business card stores a short web link, not the person’s contact details. A common chip, the NTAG213, has only 144 bytes of user memory, and the chip’s reference page recommends encoding a short redirect link for that reason. When someone taps the card, their phone opens whatever page that link leads to.

That gives you two places to make a change:

  • The page the link opens. Change it, and every tap shows the new content.
  • The link itself on the chip. Rewrite it with a phone, and the card opens a different page.

The NFC business cards guide explains how the tap works.

Find out what the card points to first

Before you decide anything, read the card. Use any free NFC reader app on Android, or the read option in a tag-writing app on iPhone, and note the URL it shows. Check the lock status too, if the app reports it.

You’ll land in one of three cases:

What the chip holds Can you reuse it? What you do
A link to a vendor or company-owned profile Yes Reassign or edit the profile in the dashboard
The employee’s own URL, chip not locked Yes Rewrite the chip with the new link
The employee’s own URL, chip locked Only if you control that URL Change the page the URL opens, or retire the card

My take: every company card should be the first case. It makes offboarding a dashboard job instead of a hardware job.

How to reuse an NFC business card through a dashboard

Most card platforms let an admin move the card to a new person without touching the chip. As of November 2026, V1CE’s help centre says that when a card is reassigned, the physical card stays the same and needs no reprinting. It also tells admins to update the page before handing the card over, so the new person never shows the old details.

Mobilo describes a “release” step that removes the previous contact information. After that, a tap brings up a blank signup form for the next holder.

The order that works:

  1. Export the leaver’s leads and contacts into a company file.
  2. Clear or edit the profile: name, photo, title, phone and email.
  3. Assign the card to the new person, or release it so they can set it up.
  4. Tap it yourself and confirm the new details load.

Step 1 is the one teams forget. Our post on exporting contacts to a CSV for your CRM walks through it.

Rewrite an unlocked chip with a phone

If the chip holds the employee’s own link and isn’t locked, you can overwrite it. Open a tag-writing app, add a URL record with the new profile link, write it, and hold the card to the back of the phone. One reprogramming guide says you repeat the same steps to overwrite the previous link.

Wear isn’t a worry here. The NTAG213 is rated for 100,000 write cycles, so a handful of handovers won’t come close. The step-by-step version is in how to write a URL to an NFC tag, and the chip differences are in NTAG213 vs NTAG215 vs NTAG216.

Say a sales rep leaves and their card still opens their personal link page. You rewrite it with the new rep’s profile URL, tap it on an iPhone and an Android phone, and hand it over the same day.

What if the chip is locked?

A locked NFC chip can’t be rewritten. The writing app’s locking guide warns that the action is irreversible, and its FAQ confirms you can’t unlock a tag once it’s been locked. If a write fails, the app’s FAQ lists three reasons: the chip is read-only, password protected, or locked.

You still have one option. If the locked link points to a page your company controls, change what that page shows. If it points to the employee’s personal account, the card is theirs in practice. Retire it.

Password protection is different from locking. The same chip supports a reversible 32-bit password that blocks writes until it’s removed. If you set up cards for staff, a password is the safer choice. It stops strangers from overwriting the card without trapping you later.

When reuse isn’t worth it

Reuse fails on cards with the old employee’s name, title or photo printed or engraved on them. Mobilo’s own guidance limits reuse to cards without printed contact details. A new hire can’t hand out a card with someone else’s name on it, whatever the chip says.

Other cases where a new card is the better call:

  • The card is lost, or the leaver kept it. Deactivate the profile or change the page instead.
  • The card left on bad terms. An unlocked card can be overwritten by anyone with a tag writer, so turn off the old page first.
  • Your company is rebranding anyway.

For blank or logo-only cards, reuse is the cheaper path, and it keeps plastic out of the bin.

How QRCard handles a card handover

A QRCard profile lives at a fixed address like https://qrcard.in/c/yourname, and you program that link onto any NFC tag yourself. QRCard doesn’t sell NFC hardware. Because the profile updates live, editing the details once changes what every tap and every QR code shows. The chip doesn’t need rewriting.

For a company card, you keep the card and edit the profile for the next person, as long as the company controls the account. If the departing employee used Mutual Exchange on Pro, export those leads to CSV first.

The limitation: QRCard’s Team plan, which lists admin tools and centralized lead export, is marked “coming soon” as of November 2026. Until it ships, the handover only works if the company, not the employee, holds the login. Our rollout plan for team cards has a leaver rule worth writing down before anyone leaves. You can see the current plan details on the features page.

FAQ

Can a locked NFC business card be rewritten?

No. Locking switches the chip’s memory to read-only for good, and there is no unlock. You can still change what the stored link opens if that link points to a page you control.

How many times can an NFC business card be rewritten?

A common chip, the NTAG213, is rated for 100,000 write cycles, so handing a card to a few people over its life is nowhere near the limit.

Should I deactivate or reassign a departing employee’s card?

Reassign it if a replacement will use it soon and nothing personal is printed on it. Deactivate it if the card is lost, has the old name printed on it, or nobody will need it.

What happens to the leads a departed employee collected?

That depends on who owns the account. Export the leads to a company file before you change the profile, so the follow-up stays with the business.

Sources