For a standard business card font size, set your name at 10 to 14 pt and your title, phone and email at 8 to 10 pt. Don’t go below 7 pt for anything, and keep contact details at 8 pt or more. If your contacts include older people, aim for 9 pt or larger on every line.
What business card font size to use for each line
Use a size range per line, with your name largest and secondary text smallest. These ranges come from a printer’s point-size guide, which says to set the name at 10 to 14 points and contact details at 8 to 10, never below 7.
| Line on the card | Size range | Notes |
|---|---|---|
| Your name | 10 to 14 pt | The largest text on the card |
| Job title and company | 8 to 10 pt | Smaller than the name |
| Phone, email, website | 8 to 10 pt | Never below 8 pt |
| Tagline or fine print | 7 to 8 pt | Use sparingly |
A real example: a realtor’s card might set “Maria Lopez” at 12 pt, “Licensed Real Estate Agent” at 9 pt, and the phone and email at 9 pt. Three sizes, one clear order.
What is the minimum font size on a business card?
The practical minimum is 7 pt for any text and 8 pt for contact details. The same printer’s guide says not to go below 8 points for contact information, and puts taglines and secondary text at 7 to 8 points.
Not every printer agrees. A print help centre article says there isn’t a single answer for every design, and that 6 pt would typically be legible to most people on a standard business card. I wouldn’t go that small. “Typically legible” is the wrong bar for the number someone has to dial.
Where printer advice and accessibility advice disagree
Accessibility guidance sets the floor higher than printers do, at about 9 pt for small print. That gap matters if your contacts include people with weaker eyesight.
A university’s font size guide says the minimum for print footers should be about 9 points. US federal guidance on accessible fonts goes further for documents: it suggests a typical size of 11 or 12 pt and calls running text below 9 pt a barrier.
Neither source is about business cards, and the same federal page says neither WCAG nor Section 508 sets a minimum font size at all. What you get instead is two sets of advice:
- Printers ask whether the ink reproduces. Their floor is 7 to 8 pt.
- Accessibility teams ask whether people can read it, and they lean toward 9 pt and up.
My take: 9 pt is the real minimum for anything someone has to type into their phone. Save 7 to 8 pt for a tagline nobody needs.
What a point actually measures
A point is one seventy-second of an inch. Both the printer’s guide and the university guide use that definition. The university guide also notes that 16px equals 12pt on screen, which is why a font that looks fine in your design app can feel tiny once printed.
Point size measures the whole type body, so two fonts at the same size can look very different when one has taller lowercase letters. Print a test sheet at actual size and read it at arm’s length before you order a full box.
When to go bigger than the usual range
Go bigger when the font is a serif, when the design uses a special finish, or when the text is light on dark. Each of these makes small type harder to print or read.
- Serif fonts. The printer’s guide suggests bumping every size up by 1 to 2 points with a serif face.
- Raised foil, embossing or spot UV. These finishes need 10 points or larger to reproduce cleanly, according to the same guide.
- Reversed type. White text on a dark background needs thicker strokes. The print help centre gives 0.5pt as the minimum line weight for reversed type, compared with 0.25pt for normal offset printing.
Treat thin and script fonts the same way. Strokes that look delicate on screen look worse on card stock.
Move the small text off the card
If you can’t fit everything at a readable size, take some of it off the card. A crowded card forces you into 7 pt text. A shorter card lets everything sit at 9 pt or larger.
A QR code that opens a digital card does this well. The paper card keeps your name, title and one contact method; the QR code holds the links, a second phone number and your address. With QRCard, the person scanning opens your card in any browser, with no app, and taps Save Contact to put a .vcf file straight into their phone’s Contacts. Nobody retypes anything.
The limitation: a QR code only helps people who scan it. Someone who keeps your card in a drawer still has to read the printed phone number, so that line stays large.
If you go this route, see how to add a QR code to a printed business card and what to put on the back of a business card. For the card itself, check the standard business card size your printer uses before you set any type, and read how to print paper business cards for proofing tips.
FAQ
What is the smallest font size for a business card?
Printer guidance puts the floor at 7 pt, with 8 pt as the minimum for contact details. Some printers say 6 pt can be legible, but accessibility guidance treats text under 9 pt as hard to read.
What font size should my name be on a business card?
Set your name between 10 and 14 pt. It should be the largest text on the card so people know who gave it to them.
Do serif fonts need to be bigger?
Yes. One printer’s guide suggests bumping every size up by 1 to 2 points when you use a serif typeface.
Is there an official minimum font size for print?
No. US federal accessibility guidance says neither WCAG nor Section 508 sets a minimum font size, so the numbers you see come from printers and accessibility teams.